Sintered 10 20 30 Micron Corrosion resistant Stainless Steel Filter Mesh

Sintered 10 20 30 Micron Corrosion resistant Stainless Steel Filter Mesh :

I.Stainless Steel Filter Mesh Structure and characteristics:

1) Standard five-layer network: it is composed of four parts: protection layer, filtration layer, separation layer and two-layer support layer;

2) High strength and good rigidity: with extremely high mechanical strength and compressive strength;

3) High precision, uniform and stable: the filtration particle size with nominal precision of 1~300 m can achieve uniform and consistent filtration performance, the meshwork does not change in the use;

4) Wide application environment: it can be durable in filtration from -200℃~650℃ temperature environment and acid-base corrosion environment;

5) Excellent cleaning: counter-current cleaning has a good effect, can be used repeatedly, and has a long life (countercurrent water, filtrate, ultrasonic wave, dissolution, baking and other cleaning methods can be used)

II.Stainless Steel Filter Mesh Main Uses:

1) Used as disperse cooling material in extremely high temperature environment;

2) Used for gas issuing liquid fluidized bed orifice plate materials;

3) High precision, high reliability and high temperature filtration materials;

4) Used for high pressure backwash oil filter.

6)Precise filtration of various hydraulic oils and lubricants in the mechanical industry;

7)Filtration and purification of various polymer melts in the chemical fiber film industry, filtration and purification of various high-temperature corrosive liquids in the petrochemical industry, filtration, washing and drying of materials in the pharmaceutical industry;

8) application of gas homogenization in powder industry, fluidized plate in steel industry;

9) Dividers in explosion-proof electrical appliances, etc.

10)Gas-solid, liquid-solid, gas-liquid separation;

Stainless Steel Filter Mesh Introduce:

This is a kind of sintering net made of multi-layer plain woven square hole net. Because of the high opening rate of square hole net, the sintered net made has the characteristics of high permeability, low resistance and large flux.It is mainly used for filtration of various gases and liquids.Because each layer of screen has a greater selectivity, its structure can be customized according to user requirements.

The material:In addition to the standard material of SUS304 (AISI304), SUS316 (AISI316), SUS316L (AISI316L), it can also be customized for customers to make Hasteley alloy, Monel alloy, Inconel and other special alloys.

size:The standard size is 500 mm ×1000mm, 600 mm ×1200mm, 1000mm ×1000mm, 1200mm ×1200mm.The dimensions within the above range can be customized according to user requirements.

The factory pictures:

knitting method:

30Micron Stainless Steel Filter Mesh

Sintered Stainless Steel Filter Mesh

1mm Stainless Steel Filter Mesh

Sintered 10 20 30 Micron Corrosion resistant Stainless Steel Filter Mesh Images